We Are Always Ready Here
Welcome to Shree Laxmi Rolling Shutter, Your Trusted Partner in Industries Excellence
Shutter maintenance is important to keep your shutters in good working order and extend their lifespan. Whether you have interior or exterior shutters, proper care can prevent common issues such as rust, malfunctioning hinges, or faded paint. Here’s a general guide for maintaining shutters:
Exterior Shutters: Use a soft brush or sponge with mild detergent and water to remove dirt, dust, and grime. Rinse thoroughly with clean water. Avoid using abrasive cleaners that can scratch the surface.
Interior Shutters: Wipe down with a microfiber cloth to remove dust. For more thorough cleaning, use a mixture of water and mild soap. Be cautious with water, especially if the shutters are wooden, to avoid warping.
For both interior and exterior shutters, lubricate hinges and any other moving parts (like louver mechanisms) with silicone spray or a similar lubricant. This will help them open and close smoothly and prevent squeaking.
Check the hinges for any rust, especially for exterior shutters, and treat them with rust-inhibiting oil if necessary.
Exterior Shutters: Look for any signs of weathering, such as peeling paint, cracks, or wood rot. Metal shutters may develop rust, which should be removed with a wire brush, and then repainted to prevent further corrosion.
Interior Shutters:Inspect for any loose slats or parts that may be misaligned. Wooden shutters may warp over time if exposed to moisture, so ensure they fit properly and have no visible cracks.
Wooden Shutters: Repaint or stain your shutters every few years, depending on wear and tear. Sand them down lightly before applying new paint or stain to ensure smooth coverage.
Metal Shutters:If your shutters are metal, ensure you apply rust-resistant paint after removing any rust. Repaint if you notice chipping or fading.
Vinyl Shutters: These require minimal maintenance, but if they lose their color or shine, use a vinyl-safe paint to refresh them.
Over time, screws and bolts may loosen, especially on exterior shutters exposed to wind and weather. Regularly check and tighten all hardware to ensure the shutters remain secure.
Replace any broken or missing parts promptly to prevent further damage.
For Exterior Shutters: Before winter or during rainy seasons, inspect the shutters for any damage and ensure that all parts are well-sealed to prevent moisture from seeping in.
For Interior Shutters: Check for drafts or gaps, especially in older windows where the shutters may not seal as well. Make necessary adjustments or repairs.
If your shutters are particularly intricate or in bad shape, consider professional cleaning, repair, or refinishing services to restore them. This is especially important for antique or custom-made shutters.